Tumblelog by Soup.io
Newer posts are loading.
You are at the newest post.
Click here to check if anything new just came in.

August 03 2017

pocketsrespect

Choosing Ceramic Tiles - What to Know

When you are planning to buy ceramic tiles to get a ceramic tile backsplash, ceramic tiles, wall tiles and even ceramic tiles for ornamentation there are specific factors to understand in choosing which tile is best for the application. Its not all tiles are the same along with the differences can decide if your ceramic tiles holds to the use you are putting them.
For instance, low fire tiles or tiles who have only been through a bisque firing are usually cheaper however, not as durable as high fired tiles. Even if the tile continues to be glazed, it could continue to have only gone through one firing and very possibly just a low firing and so the fact of it being glossy and colorful is no indication the tile gets the toughness for a high-fired tile. Greenware - ceramics which includes dried although not been fired, might be glazed having a low fire glaze and fired to some comparatively low temperature.
A real cermic tile wouldn't be suited to certain applications. By way of example should you decide to use the tile for a backsplash, counter-top or tabletop you need a very durable tile that can hold up to frequent cleaning as well as in the case of a countertop or tabletop, some hard use too. Stoneware clays will be the the best option with this type of use. Stoneware is generally fired about cone 6 (around 2200 degrees F) and is strong.

However in your inquiry, don't stop in doing what type of clay the tiles are made of. Glazes vary enormously and also so-called 'food-safe' glazes can leach out chemicals, stain and lose their color. Many manufactured tiles are of poor quality will not deal with the uses they may be marketed for. Of course, there are several quite excellent manufactured tiles too so that you need to inquire to be certain. That information however may or otherwise be readily available.
The sort of ornamentation in the ceramic tile is very important too. For the ceramic countertop or tabletop, the tiles should be flat. To get a backsplash the tiles might have low relief but high relief is going to be hard to as well as is just not generally advised.
Fireplaces, murals, mosaics and facades could be either flat, have low relief or high relief and occasional fire glazes are OK during these applications. Be careful though with areas that will get much use, such as around a fireplace where logs will be placed or fireplace tools will be used. Low fire tiles and glazes can crack or chip much more easily than stoneware and fire glazes. Also, if it's a region that will require frequent cleaning, high relief may prove troublesome.
For ceramic walls in dry areas not susceptible to much physical contact nearly any type of tile and glaze is adequate. For wet areas flat tiles, low relief tiles as well as high relief tiles may be used so long as they are not inside a hazardous place which a body can inadvertently come into contact with them. A substantial frog leaping out from your shower wall at body height may not be advisable.
Flooring presents other challenges, and opportunities. Clearly floor tiles have to be durable really at high level fire stoneware is the best choice. Just about any relief is not advised as uneven surfaces can be challenging to steer on, specifically the over 60's. Yet another consideration with flooring tiles is slickness. A glossy glaze on a floor is not recommended. A heavily textured glaze or perhaps a matte glaze is the most suitable.
Check out about ceramic tiles web site: click to read more.

Don't be the product, buy the product!

Schweinderl